Atop-technology SE5001A User manual Bedienungsanleitung PDF herunterladen (Seite 71)

User Manual Version 1.0

SE5001A Serial Device Server

9. Repeat the process above again for kernel or AP firmware if necessary.

Note: After the upgrading process finishes, SE5001A will program the flash memory and buzzer beeps 6

times then restarts. Normally, it takes around 10 seconds to complete the programming process. If an error

occurs during the programming process, SE5001A will clear the corresponding memory and the system

remains intact of what it was.

Error Messages

Firmware upgrade may not be successful if errors occur during the process.

Error Cause

Message

Comments

Illegal Hex file format

 Hex File Text Error

 Hex File Check-Sum Error

 Hex File Format Error

 Hex File End of Record Error

SE5001A handshaking problem

 SE5001A ACK Start Address Error

 SE5001A ACK Length Error

 SE5001A Response Command Error

Configuration file

 Remote IP not found

 Open configuration file failure

1 2 ... 66 67 68 69 70 71 72

Keine Kommentare

Atop-technology SE5001A User manual Bedienungsanleitung Seite 71